Page 4 - Eco-Friendly Product Information

USES:

METAL-PRIME RED can be used for interior or exterior surfaces,s excellent

adhesion to aluminum, steel, galvanized, ferrous and other metals in normal
chemical environments. It is excellent for both new construction and renovations
on industrial, commercial and residential applications.

SURFACE PREPARATION:

For proper adhesion and maximum performance, it is essential that the surface is
prepared properly. The surface must be absolutely clean, dry, and free of all scaling

rust, mill scale, dirt, grease, wax, oil, chalk, incompatible paint or detergent/chemical
films. Rusted metals should be cleaned down to remove all scaling and flaking rust by
scraping, wire brushing, sanding or sandblasting. Be sure the surface is thoroughly de-

greased and moisture free before priming. Use a degreaser on galvanized or coated
metals that have oils or surface treatments.

Apply only to a sound, completely dry, well prepared roof surface. Leaks must be

repaired before any coating is applied. Prepare surface by thoroughly pressure washing
with a water and chlorine mixture using at least 1500 P.S.I. to remove any previous
coatings, dirt, grease, and other foreign materials, especially mold, mildew and algae.

METAL-PRIME RED will resist mildew growth, but will not kill mildew already on
the surface. Apply METAL-PRIME RED in rusted or corroded areas that need to be
treated. TWO

USE:
ENVIRO can be used on most wall, ceiling and trim surfaces such as primed plaster,
wallboard, wood, concrete, brick, masonry, primed ferrous metal, non-ferrous metal,

and well bonded wallpaper and various other substrates.
ENVIRO is excellent for most residential, commercial and industrial applications.

PREVIOUSLY PAINTED SURFACES:

Wash off all dirt, grease, soap and oil build-up with a powdered household cleaner and
water. Rinse thoroughly. Remove loose paint and powdery substances. Patch cracks and
holes with patching paste. Dull any nonporous or glossy surfaces by thorough washing
with an abrasive kitchen cleaner or by scuff sanding. Rinse and/or remove any powdery

residues. Spot prime patched areas before painting entire wall with ENVIRO Paint.